2021 China New Design Cast Iron Strainer – TWS Flanged Y strainer According to DIN3202 F1 – TWS Valve
2021 China New Design Cast Iron Strainer – TWS Flanged Y strainer According to DIN3202 F1 – TWS Valve Detail:
Description:
TWS Flanged Y Strainer is device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
Introductioin:
Flanged strainers are main parts of all kinds of pumps, valves in the pipeline. It is suitable for pipeline of norminal pressure<1.6MPa. Mainly used to filter dirt, rust and other debris in media such as steam, air and water etc.
Specification:
| Nominal DiameterDN(mm) | 40-600 |
| Norminal pressure(MPa) | 1.6 |
| Suitable temperature ℃ | 120 |
| Suitable Media | Water, Oil, Gas etc |
| Main material | HT200 |
Sizing Your Mesh Filter for a Y strainer
Of course, the Y strainer wouldn’t be able to do its job without the mesh filter that is properly sized. To find the strainer that’s perfect for your project or job, it’s important to understand the basics of mesh and screen sizing. There are two terms used to describe the size of the openings in the strainer through which debris passes. One is micron and the other is mesh size. Though these are two different measurements, they describe the same thing.
What is a Micron?
Standing for micrometer, a micron is a unit of length that’s used to measure tiny particles. For scale, a micrometer is one thousandth of a millimeter or about one 25-thousandths of an inch.
What is Mesh Size?
A strainer’s mesh size indicates how many openings there are in the mesh across one linear inch. Screens are labeled by this size, so a 14-mesh screen means you’ll find 14 openings across one inch. So, a 140-mesh screen means that there are 140 openings per inch. The more openings per inch, the smaller the particles that can pass through. The ratings can range from a size 3 mesh screen with 6,730 microns to a size 400 mesh screen with 37 microns.
Applications:
Chemical processing, petroleum, power generation and marine.
Dimensions:
| DN | D | d | K | L | W.G（kg) | ||||||
| F1 | GB | b | f | n-d | H | F1 | GB | ||||
| 40 | 150 | 84 | 110 | 200 | 200 | 18 | 3 | 4-18 | 125 | 9.5 | 9.5 |
| 50 | 165 | 99 | 1250 | 230 | 230 | 20 | 3 | 4-18 | 133 | 12 | 12 |
| 65 | 185 | 118 | 145 | 290 | 290 | 20 | 3 | 4-18 | 154 | 16 | 16 |
| 80 | 200 | 132 | 160 | 310 | 310 | 22 | 3 | 8-18 | 176 | 20 | 20 |
| 100 | 220 | 156 | 180 | 350 | 350 | 24 | 3 | 8-18 | 204 | 28 | 28 |
| 125 | 250 | 184 | 210 | 400 | 400 | 26 | 3 | 8-18 | 267 | 45 | 45 |
| 150 | 285 | 211 | 240 | 480 | 480 | 26 | 3 | 8-22 | 310 | 62 | 62 |
| 200 | 340 | 266 | 295 | 600 | 600 | 30 | 3 | 12-22 | 405 | 112 | 112 |
| 250 | 405 | 319 | 355 | 730 | 605 | 32 | 3 | 12-26 | 455 | 163 | 125 |
| 300 | 460 | 370 | 410 | 850 | 635 | 32 | 4 | 12-26 | 516 | 256 | 145 |
| 350 | 520 | 430 | 470 | 980 | 696 | 32 | 4 | 16-26 | 495 | 368 | 214 |
| 400 | 580 | 482 | 525 | 1100 | 790 | 38 | 4 | 16-30 | 560 | 440 | 304 |
| 450 | 640 | 532 | 585 | 1200 | 850 | 40 | 4 | 20-30 | 641 | — | 396 |
| 500 | 715 | 585 | 650 | 1250 | 978 | 42 | 4 | 20-33 | 850 | — | 450 |
| 600 | 840 | 685 | 770 | 1450 | 1295 | 48 | 5 | 20-36 | 980 | — | 700 |
Product detail pictures:
Related Product Guide:
2021 China New Design Cast Iron Strainer – TWS Flanged Y strainer According to DIN3202 F1 – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Hot New Products Flange End Y Type Strainer - ...
Description: Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design. Material list: Parts Material Body Cast iron Bonnet Cast iron Filtering net Stainless steel Feature: Unlike other types of strainers, a Y-Strainer has the advan...
-
Europe style for Dn150 Butterfly Valve - UD Se...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
100% Original Manual Wafer Butterfly Valve - U...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
-
OEM/ODM Manufacturer Non Rising Stem Metal Seat...
Description: WZ Series Metal seated NRS gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Application: Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc. Dimensions: Type DN(mm) L D D1 b Z-Φd H D0 Weight (kg) NRS 40 165 150 110 18 4-Φ19 257 140 10/11 ...
-
Chinese wholesale Butterfly Valve Epdm Cartridg...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
China Factory for Electric Butterfly Valves - ...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
