2021 High quality Bs5153 Check Valve - AH Series Dual plate wafer check valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
2021 High quality Bs5153 Check Valve - AH Series Dual plate wafer check valve – TWS Valve Detail:

Description:

Material list:

No. Part Material
AH      EH BH MH
1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400
2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc.
3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400
4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400
5 Spring 316 ……

Feature:

Fasten Screw:
Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking.
Body:
Short face to face and good rigidity.
Rubber Seat:
Vulcanized on body,tight fit and tight seat with no leakage.
Springs:
Dual springs distribute the load force evenly across each plate,ensuring quick shut off in back flow.
Disc:
Adopting unitized design of dual dics and two torsion springs,the disc closes quikly and removes water-hammer.
Gasket:
It adjusts fit-up gap and assures disc seal performance.

Dimensions:

"

Size D D1 D2 L R t Weight(kg)
(mm) (inch)
50 2″ 105(4.134) 65(2.559) 32.18(1.26) 54(2.12) 29.73(1.17) 25(0.984) 2.8
65 2.5″ 124(4.882) 78(3) 42.31(1.666) 60(2.38) 36.14(1.423) 29.3(1.154) 3
80 3″ 137(5.39) 94(3.7) 66.87(2.633) 67(2.62) 43.42(1.709) 27.7(1.091) 3.8
100 4″ 175(6.89) 117(4.6) 97.68(3.846) 67(2.62) 55.66(2.191) 26.7(1.051) 5.5
125 5″ 187(7.362) 145(5.709) 111.19(4.378) 83(3.25) 67.68(2.665) 38.6(1.52) 7.4
150 6″ 222(8.74) 171(6.732) 127.13(5) 95(3.75) 78.64(3.096) 46.3(1.8) 10.9
200 8″ 279(10.984) 222(8.74) 161.8(6.370) 127(5) 102.5(4.035) 66(2.59) 22.5
250 10″ 340(13.386) 276(10.866) 213.8(8.49) 140(5.5) 126(4.961) 70.7(2.783) 36
300 12″ 410(16.142) 327(12.874) 237.9(9.366) 181(7.12) 154(6.063) 102(4.016) 54
350 14″ 451(17.756) 375(14.764) 312.5(12.303) 184(7.25) 179.9(7.083) 89.2(3.512) 80
400 16″ 514(20.236) 416(16.378) 351(13.819) 191(7.5) 198.4(7.811) 92.5(3.642) 116
450 18″ 549(21.614) 467(18.386) 409.4(16.118) 203(8) 226.2(8.906) 96.2(3.787) 138
500 20″ 606(23.858) 514(20.236) 451.9(17.791) 213(8.374) 248.2(9.72) 102.7(4.043) 175
600 24″ 718(28.268) 616(24.252) 554.7(21.839) 222(8.75) 297.4(11.709) 107.3(4.224) 239
750 30″ 884(34.8) 772(30.39) 685.2(26.976) 305(12) 374(14.724) 150(5.905) 659

Product detail pictures:

2021 High quality Bs5153 Check Valve - AH Series Dual plate wafer check valve – TWS Valve detail pictures


Related Product Guide:

2021 High quality Bs5153 Check Valve - AH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • Reliable Supplier Wafer Lug Butterfly Valve - DL Series flanged concentric butterfly valve – TWS Valve

      Reliable Supplier Wafer Lug Butterfly Valve - ...

      Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor.  Characteristic: 1. Short Length pattern design 2. V...

    • New Arrival China Light Weight Check Valve - AH Series Dual plate wafer check valve – TWS Valve

      New Arrival China Light Weight Check Valve - A...

      Description: Material list: No. Part Material AH      EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...

    • Factory wholesale Ansi Check Valve - BH Series Dual plate wafer check valve – TWS Valve

      Factory wholesale Ansi Check Valve - BH Series...

      Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...

    • OEM/ODM Manufacturer Resilient Butterfly Valve - UD Series soft sleeve seated butterfly valve – TWS Valve

      OEM/ODM Manufacturer Resilient Butterfly Valve ...

      UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...

    • PriceList for Wafer Type Check Valve - AH Series Dual plate wafer check valve – TWS Valve

      PriceList for Wafer Type Check Valve - AH Seri...

      Description: Material list: No. Part Material AH      EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...

    • High Quality Lug Type Butterfly Valve - MD Series Lug butterfly valve – TWS Valve

      High Quality Lug Type Butterfly Valve - MD Ser...

      Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...