Bottom price Flange Type Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve
Bottom price Flange Type Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve Detail:
Description:
Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron.
Working Temperature:
•-45℃ to +135℃ for EPDM liner
• -12℃ to +82℃ for NBR liner
• +10℃ to +150℃ for PTFE liner
Material of Main Parts:
| Parts | Material |
| Body | CI,DI,WCB,ALB,CF8,CF8M |
| Disc | DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel |
| Stem | SS416,SS420,SS431,17-4PH |
| Seat | NBR,EPDM,Viton,PTFE |
| Taper Pin | SS416,SS420,SS431,17-4PH |
Dimension:
| Size | A | B | C | D | L | H | D1 | n-Φ | K | E | n1-Φ1 | Φ2 | G | n2-M | f | j | X | Weight (kg) | |
| (mm) | (inch) | ||||||||||||||||||
| 40 | 1.5 | 136 | 69 | 33 | 42.6 | 28 | 77.77 | 110 | 4-18 | 77 | 50 | 4-6.7 | 12.6 | 100 | ─ | 13 | 13.8 | 3 | 2.3 |
| 50 | 2 | 161 | 80 | 43 | 52.9 | 28 | 84.84 | 120 | 4-23 | 77 | 57.15 | 4-6.7 | 12.6 | 100 | ─ | 13 | 13.8 | 3 | 2.8 |
| 65 | 2.5 | 175 | 89 | 46 | 64.5 | 28 | 96.2 | 136.2 | 4-26.5 | 77 | 57.15 | 4-6.7 | 12.6 | 120 | ─ | 13 | 13.8 | 3 | 3.5 |
| 80 | 3 | 181 | 95 | 45.21 | 78.8 | 28 | 61.23 | 160 | 8-18 | 77 | 57.15 | 4-6.7 | 12.6 | 127 | ─ | 13 | 13.8 | 3 | 3.7 |
| 100 | 4 | 200 | 114 | 52.07 | 104 | 28 | 70.8 | 185 | 4-24.5 | 92 | 69.85 | 4-10.3 | 15.77 | 156 | ─ | 13 | 17.77 | 5 | 5.4 |
| 125 | 5 | 213 | 127 | 55.5 | 123.3 | 28 | 82.28 | 215 | 4-23 | 92 | 69.85 | 4-10.3 | 18.92 | 190 | ─ | 13 | 20.92 | 5 | 7.7 |
| 150 | 6 | 226 | 139 | 55.75 | 155.6 | 28 | 91.08 | 238 | 4-25 | 92 | 69.85 | 4-10.3 | 18.92 | 212 | ─ | 13 | 20.92 | 5 | 9.3 |
| 200 | 8 | 260 | 175 | 60.58 | 202.5 | 38 | 112.89/76.35 | 295 | 4-25/4-23 | 115 | 88.9 | 4-14.3 | 22.1 | 268 | ─ | 13 | 24.1 | 5 | 14.5 |
| 250 | 10 | 292 | 203 | 68 | 250.5 | 38 | 92.4 | 357 | 4-29/4-29 | 115 | 88.9 | 4-14.3 | 28.45 | 325 | ─ | 13 | 31.45 | 8 | 23 |
| 300 | 12 | 337 | 242 | 76.9 | 301.6 | 38 | 105.34 | 407 | 4-30 | 140 | 107.95 | 4-14.3 | 31.6 | 403 | ─ | 20 | 34.6 | 8 | 36 |
| 350 | 14 | 368 | 267 | 76.5 | 333.3 | 45 | 91.11 | 467 | 4-26/4-30 | 140 | 107.95 | 4-14.3 | 31.6 | 436 | ─ | 20 | 34.6 | 8 | 45 |
| 400 | 16 | 400 | 325 | 85.7 | 389.6 | 51/60 | 100.47/102.425 | 515/525 | 4-26/4-30 | 197 | 158.75 | 4-20.6 | 33.15 | 488 | ─ | 20 | 36.15 | 10 | 65 |
| 450 | 18 | 422 | 345 | 104.6 | 440.51 | 51/60 | 88.39/91.51 | 565/585 | 4-26/4-33 | 197 | 158.75 | 4-20.6 | 37.95 | 536 | ─ | 20 | 41 | 10 | 86 |
| 500 | 20 | 480 | 378 | 130.28 | 491.6 | 57/75 | 86.99/101.68 | 620/650 | 20-30/20-36 | 197 | 158.75 | 4-20.6 | 41.15 | 590 | ─ | 22 | 44.15 | 10 | 113 |
| 600 | 24 | 562 | 475 | 151.36 | 592.5 | 70/75 | 113.42/120.46 | 725/770 | 24-30/24-33 | 276 | 215.9 | 4-22.2 | 50.65 | 816 | ─ | 22 | 54.65 | 16 | 209 |
| 700 | 28 | 624 | 535 | 163 | 695 | 66 | 109.65 | 840 | 24-30 | 300 | 254 | 8-18 | 63.35 | 895 | ─ | 30 | 71.4 | 18 | 292 |
| 800 | 32 | 672 | 606 | 188 | 794.7 | 66 | 124 | 950 | 24-33 | 300 | 254 | 8-18 | 63.35 | 1015 | ─ | 30 | 71.4 | 18 | 396 |
| 900 | 36 | 720 | 670 | 203 | 870 | 118 | 117.57 | 1050 | 24-33 | 300 | 254 | 8-18 | 75 | 1115 | 4-M30 | 34 | 84 | 20 | 520 |
| 1000 | 40 | 800 | 735 | 216 | 970 | 142 | 129.89 | 1160 | 24-36 | 300 | 254 | 8-18 | 85 | 1230 | 4-M33 | 35 | 95 | 22 | 668 |
| 1200 | 48 | 941 | 878 | 254 | 1160 | 150 | 101.5 | 1380 | 32-39 | 350 | 298 | 8-22 | 105 | 1455 | 4-M36 | 35 | 117 | 28 | 1080 |
Product detail pictures:
Related Product Guide:
Bottom price Flange Type Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Factory wholesale Sea Water Check Valve - BH S...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Wholesale Dealers of Butterfly Valve Wafer Type...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Good quality Handwheel Butterfly Valve - DL Se...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
Original Factory Butterfly Valve Factory - MD ...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
-
Factory Cheap Hot China Balancing Valve - TWS ...
Description: TWS Flanged Static balancing valve is a key hydraulic balance product used for precise flow regulating of water pipelines system in HVAC application to ensure static hydraulic balance across whole water system. The series can ensure the actual flow of each terminal equipment and pipeline in line with the design flow in the phase of system initial commisiioning by site commissiong with flow measuring computer. The series are widely used in main pipes, branch pipes and terminal equ...
-
OEM/ODM China Gate Valve Handwheel - EZ Series...
Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...
