Excellent quality Rubber Check Valve - EH Series Dual plate wafer check valve – TWS Valve
Excellent quality Rubber Check Valve - EH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines.
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.
-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Applications:
General industrial use.
Dimensions:
| Size | D | D1 | D2 | L | R | t | Weight(kg) | |
| (mm) | (inch) | |||||||
| 40 | 1.5″ | 92 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 50 | 2″ | 107 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 65 | 2.5″ | 127 | 80 | 60.2 | 46 | 36.1 | 20 | 2.4 |
| 80 | 3″ | 142 | 94 | 66.4 | 64 | 43.4 | 28 | 3.6 |
| 100 | 4″ | 162 | 117 | 90.8 | 64 | 52.8 | 27 | 5.7 |
| 125 | 5″ | 192 | 145 | 116.9 | 70 | 65.7 | 30 | 7.3 |
| 150 | 6″ | 218 | 170 | 144.6 | 76 | 78.6 | 31 | 9 |
| 200 | 8″ | 273 | 224 | 198.2 | 89 | 104.4 | 33 | 17 |
| 250 | 10″ | 328 | 265 | 233.7 | 114 | 127 | 50 | 26 |
| 300 | 12″ | 378 | 310 | 283.9 | 114 | 148.3 | 43 | 42 |
| 350 | 14″ | 438 | 360 | 332.9 | 127 | 172.4 | 45 | 55 |
| 400 | 16″ | 489 | 410 | 381 | 140 | 197.4 | 52 | 75 |
| 450 | 18″ | 539 | 450 | 419.9 | 152 | 217.8 | 58 | 101 |
| 500 | 20″ | 594 | 505 | 467.8 | 152 | 241 | 58 | 111 |
| 600 | 24″ | 690 | 624 | 572.6 | 178 | 295.4 | 73 | 172 |
| 700 | 28″ | 800 | 720 | 680 | 229 | 354 | 98 | 219 |
Product detail pictures:
Related Product Guide:
Excellent quality Rubber Check Valve - EH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Factory Free sample Awwa C504 Gate Valve - AZ ...
Description: AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight se...
-
Super Lowest Price Crane Butterfly Valve - DC ...
Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...
-
Lowest Price for Worm Geared Butterfly Valve -...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Factory Price Manual Butterfle Valve - DL Seri...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
2021 Good Quality Pneumatic Rubber Lined Butter...
Description: FD Series Wafer butterfly valve with PTFE lined structure, this series resilient seated butterfly valve is designed for corrosive media, especially various kinds of strong acids, such as sulfuric acid and aqua regia. The PTFE material will not pollute media within a pipeline. Characteristic: 1. The butterfly valve comes with two-way installation, zero leakage, corrosion resistance, light weight, small size, low cost and easy installation.2. Tts PTFE clad seat is capable of protec...
-
PriceList for Din Butterfly Valve - ED Series ...
Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...
