Factory Free sample Awwa C504 Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve
Factory Free sample Awwa C504 Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Rising stem (Outside Screw and Yoke)type, and suitable for use with water and neutral liquids (sewage) . The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is open, while the stem is no longer visible when the valve is closed. In general this is a requirement in these kinds of systems to ensure a fast visual control of the system status..
Features:
Body:No groove design,prevent from impurities,ensure effective sealing.With epoxy coating inside,conform to potable water requirement.
Disc:Metal frame with rubber lined,ensure valve sealing and conform to potable water requirement.
Stem:Made of high strength materials,ensure gate valve easily controlled.
Stem nut:The conection piece of stem and disc,ensure disc easy operating.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | H1 | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 182(7.17) | 126(4.96) | 190.5(7.5) | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 25 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 250(9.84) | 130(5.12) | 203(8) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 31 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 250(9.84) | 157(6.18) | 228.6(9) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 48 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 302(11.89) | 225(8.86) | 266.7(10.5) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 72 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 345(13.58) | 285(11.22) | 292(11.5) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 132 |
| 250(10″) | 362(14.252) | 406.4(16) | 408(16.06) | 324(12.760) | 330.2(13) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 210 |
| 300(12″) | 431.8(17) | 482.6(19) | 483(19.02) | 383(15.08) | 355.6(14) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 315 |
Product detail pictures:
Related Product Guide:
Factory Free sample Awwa C504 Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
New Delivery for Pneumatic Soft Sealed Butterfl...
Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...
-
China Factory for Electric Butterfly Valves - ...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
-
OEM/ODM China Industrial Check Valve - BH Seri...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
OEM Factory for Pn16&1.6 Mpa C504 Butterfly...
Description: FD Series Wafer butterfly valve with PTFE lined structure, this series resilient seated butterfly valve is designed for corrosive media, especially various kinds of strong acids, such as sulfuric acid and aqua regia. The PTFE material will not pollute media within a pipeline. Characteristic: 1. The butterfly valve comes with two-way installation, zero leakage, corrosion resistance, light weight, small size, low cost and easy installation.2. Tts PTFE clad seat is capable of protec...
-
High definition En558 Butterfly Valve - UD Ser...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
OEM Factory for Big Gate Valve - WZ Series Met...
Description: WZ Series Metal seated OS&Y gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is ...
