factory Outlets for Industry Butterfly Valve - YD Series Wafer butterfly valve – TWS Valve
factory Outlets for Industry Butterfly Valve - YD Series Wafer butterfly valve – TWS Valve Detail:
Description:
YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization.
Characteristic:
1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed.
2. Simple, compact structure, quick 90 degree on-off operation
3. Disc has two-way bearing, perfect seal, without leakage under the pressure test.
4. Flow curve tending to straight-line. Excellent regulation performance.
5. Various kinds of materials, applicable to different media.
6. Strong wash and brush resistance, and can fit to bad working condition.
7. Center plate structure, small torque of open and close.
8. Long service life. Standing the test of ten thousands opening and closing operations.
9. Can be used in cutting off and regulating media.
Typical application:
1. Water works and water resource project
2. Enviroment Protection
3. Public Facilities
4. Power and Public Utilities
5. Building industry
6. Petroleum/ Chemical
7. Steel. Metallurgy
8. Paper make industry
9. Food/Beverage etc
Dimension:
| Size | A | B | C | D | L | D1 | D2 | Φ1 | ΦK | E | R1 (PN10) | R2 (PN16) | Φ2 | f | j | x | □w*w | Weight (kg) | |
| mm | inch | ||||||||||||||||||
| 32 | 11/4 | 125 | 73 | 33 | 36 | 28 | 100 | 100 | 7 | 65 | 50 | R9.5 | R9.5 | 12.6 | 12 | – | – | 9*9 | 1.6 |
| 40 | 1.5 | 125 | 73 | 33 | 43 | 28 | 110 | 110 | 7 | 65 | 50 | R9.5 | R9.5 | 12.6 | 12 | – | – | 9*9 | 1.8 |
| 50 | 2 | 125 | 73 | 43 | 53 | 28 | 125 | 125 | 7 | 65 | 50 | R9.5 | R9.5 | 12.6 | 12 | – | – | 9*9 | 2.3 |
| 65 | 2.5 | 136 | 82 | 46 | 64 | 28 | 145 | 145 | 7 | 65 | 50 | R9.5 | R9.5 | 12.6 | 12 | – | – | 9*9 | 3 |
| 80 | 3 | 142 | 91 | 46 | 79 | 28 | 160 | 160 | 7 | 65 | 50 | R9.5 | R9.5 | 12.6 | 12 | – | – | 9*9 | 3.7 |
| 100 | 4 | 163 | 107 | 52 | 104 | 28 | 180 | 180 | 10 | 90 | 70 | R9.5 | R9.5 | 15.8 | 12 | – | – | 11*11 | 5.2 |
| 125 | 5 | 176 | 127 | 56 | 123 | 28 | 210 | 210 | 10 | 90 | 70 | R9.5 | R9.5 | 18.9 | 12 | – | – | 14*14 | 6.8 |
| 150 | 6 | 197 | 143 | 56 | 155 | 28 | 240 | 240 | 10 | 90 | 70 | R11.5 | R11.5 | 18.9 | 12 | – | – | 14*14 | 8.2 |
| 200 | 8 | 230 | 170 | 60 | 202 | 38 | 295 | 295 | 12 | 125 | 102 | R11.5 | R11.5 | 22.1 | 15 | – | – | 17*17 | 14 |
| 250 | 10 | 260 | 204 | 68 | 250 | 38 | 350 | 355 | 12 | 125 | 102 | R11.5 | R14 | 28.5 | 15 | – | – | 22*22 | 23 |
| 300 | 12 | 292 | 240 | 78 | 302 | 38 | 400 | 410 | 12 | 125 | 102 | R11.5 | R14 | 31.6 | 20 | – | – | 22*22 | 32 |
| 350 | 14 | 336 | 267 | 78 | 333 | 45 | 460 | 470 | 14 | 150 | 125 | R11.5 | R14 | 31.6 | 20 | 34.6 | 8 | – | 43 |
| 400 | 16 | 368 | 325 | 102 | 390 | 51/60 | 515 | 525 | 18 | 175 | 140 | R14 | R15.5 | 33.2 | 22 | 36.2 | 10 | – | 57 |
| 450 | 18 | 400 | 356 | 114 | 441 | 51/60 | 565 | 585 | 18 | 175 | 140 | R14 | R14 | 38 | 22 | 41 | 10 | – | 78 |
| 500 | 20 | 438 | 395 | 127 | 492 | 57/75 | 620 | 650 | 18 | 175 | 140 | R14 | R14 | 41.1 | 22 | 44.1 | 10 | – | 105 |
| 600 | 24 | 562 | 475 | 154 | 593 | 70/75 | 725 | 770 | 22 | 210 | 165 | R15.5 | R15.5 | 50.6 | 22 | 54.6 | 16 | – | 192 |
Product detail pictures:
Related Product Guide:
factory Outlets for Industry Butterfly Valve - YD Series Wafer butterfly valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Discountable price Butterfly Valve Actuator - ...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
2021 China New Design Flow Check Valve - BH Se...
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
Hot New Products Cast Iron Balancing Valve - T...
Description: TWS Flanged Static balancing valve is a key hydraulic balance product used for precise flow regulating of water pipelines system in HVAC application to ensure static hydraulic balance across whole water system. The series can ensure the actual flow of each terminal equipment and pipeline in line with the design flow in the phase of system initial commisiioning by site commissiong with flow measuring computer. The series are widely used in main pipes, branch pipes and terminal equ...
-
PriceList for Soft Seated Gate Valve - WZ Ser...
Description: WZ Series Metal seated OS&Y gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is ...
-
Discountable price Butterfly Valve Actuator - ...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
-
2021 wholesale price Air Vent Valve For Hvac Sy...
Description: The composite high-speed air release valve are combined with two parts of high-pressure diaphragm air valve and the low pressure inlet and exhaust valve ,It has both exhaust and intake functions. The high-pressure diaphragm air release valve automatically discharges the small amount of air accumulated in the pipeline when the pipeline is under pressure. The low-pressure intake and exhaust valve can not only discharge the air in the pipe when the empty pipe is filled with water, b...
