Free sample for Flap Plate Wafer Check Valve - AH Series Dual plate wafer check valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Free sample for Flap Plate Wafer Check Valve - AH Series Dual plate wafer check valve – TWS Valve Detail:

Description:

Material list:

No. Part Material
AH      EH BH MH
1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400
2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc.
3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400
4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400
5 Spring 316 ……

Feature:

Fasten Screw:
Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking.
Body:
Short face to face and good rigidity.
Rubber Seat:
Vulcanized on body,tight fit and tight seat with no leakage.
Springs:
Dual springs distribute the load force evenly across each plate,ensuring quick shut off in back flow.
Disc:
Adopting unitized design of dual dics and two torsion springs,the disc closes quikly and removes water-hammer.
Gasket:
It adjusts fit-up gap and assures disc seal performance.

Dimensions:

"

Size D D1 D2 L R t Weight(kg)
(mm) (inch)
50 2″ 105(4.134) 65(2.559) 32.18(1.26) 54(2.12) 29.73(1.17) 25(0.984) 2.8
65 2.5″ 124(4.882) 78(3) 42.31(1.666) 60(2.38) 36.14(1.423) 29.3(1.154) 3
80 3″ 137(5.39) 94(3.7) 66.87(2.633) 67(2.62) 43.42(1.709) 27.7(1.091) 3.8
100 4″ 175(6.89) 117(4.6) 97.68(3.846) 67(2.62) 55.66(2.191) 26.7(1.051) 5.5
125 5″ 187(7.362) 145(5.709) 111.19(4.378) 83(3.25) 67.68(2.665) 38.6(1.52) 7.4
150 6″ 222(8.74) 171(6.732) 127.13(5) 95(3.75) 78.64(3.096) 46.3(1.8) 10.9
200 8″ 279(10.984) 222(8.74) 161.8(6.370) 127(5) 102.5(4.035) 66(2.59) 22.5
250 10″ 340(13.386) 276(10.866) 213.8(8.49) 140(5.5) 126(4.961) 70.7(2.783) 36
300 12″ 410(16.142) 327(12.874) 237.9(9.366) 181(7.12) 154(6.063) 102(4.016) 54
350 14″ 451(17.756) 375(14.764) 312.5(12.303) 184(7.25) 179.9(7.083) 89.2(3.512) 80
400 16″ 514(20.236) 416(16.378) 351(13.819) 191(7.5) 198.4(7.811) 92.5(3.642) 116
450 18″ 549(21.614) 467(18.386) 409.4(16.118) 203(8) 226.2(8.906) 96.2(3.787) 138
500 20″ 606(23.858) 514(20.236) 451.9(17.791) 213(8.374) 248.2(9.72) 102.7(4.043) 175
600 24″ 718(28.268) 616(24.252) 554.7(21.839) 222(8.75) 297.4(11.709) 107.3(4.224) 239
750 30″ 884(34.8) 772(30.39) 685.2(26.976) 305(12) 374(14.724) 150(5.905) 659

Product detail pictures:

Free sample for Flap Plate Wafer Check Valve - AH Series Dual plate wafer check valve – TWS Valve detail pictures


Related Product Guide:

Free sample for Flap Plate Wafer Check Valve - AH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • High Quality for Nibco Butterfly Valve - MD Series Wafer butterfly valve – TWS Valve

      High Quality for Nibco Butterfly Valve - MD Se...

      Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...

    • High Quality Y-Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve

      High Quality Y-Strainer - TWS Flanged Y Strain...

      Description: Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design. Material list:  Parts Material Body Cast iron Bonnet Cast iron Filtering net Stainless steel Feature: Unlike other types of strainers, a Y-Strainer has the advan...

    • Chinese Professional Ductile Iron Air Release Valve - TWS Air release valve – TWS Valve

      Chinese Professional Ductile Iron Air Release V...

      Description: The composite high-speed air release valve are combined with two parts of high-pressure diaphragm air valve and the low pressure inlet and exhaust valve ,It has both exhaust and intake functions. The high-pressure diaphragm air release valve automatically discharges the small amount of air accumulated in the pipeline when the pipeline is under pressure. The low-pressure intake and exhaust valve can not only discharge the air in the pipe when the empty pipe is filled with water, b...

    • Bottom price Api Gate Valve -  AZ Series Resilient seated OS&Y gate valve – TWS Valve

      Bottom price Api Gate Valve - AZ Series Resil...

      Description: AZ Series Resilient seated NRS gate valve is a wedge gate valve and Rising stem (Outside Screw and Yoke)type, and suitable for use with water and neutral liquids (sewage) . The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the ent...

    • Best Price for Kennedy Butterfly Valve - ED Series Wafer butterfly valve – TWS Valve

      Best Price for Kennedy Butterfly Valve - ED Se...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile s...

    • Factory wholesale Sea Water Check Valve - AH Series Dual plate wafer check valve – TWS Valve

      Factory wholesale Sea Water Check Valve - AH S...

      Description: Material list: No. Part Material AH      EH BH MH 1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400 2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc. 3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400 4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400 5 Spring 316 …… Feature: Fasten Screw: Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking. Body: Short face to f...