Good quality Stainless Steel Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve
Good quality Stainless Steel Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Rising stem (Outside Screw and Yoke)type, and suitable for use with water and neutral liquids (sewage) . The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is open, while the stem is no longer visible when the valve is closed. In general this is a requirement in these kinds of systems to ensure a fast visual control of the system status..
Features:
Body:No groove design,prevent from impurities,ensure effective sealing.With epoxy coating inside,conform to potable water requirement.
Disc:Metal frame with rubber lined,ensure valve sealing and conform to potable water requirement.
Stem:Made of high strength materials,ensure gate valve easily controlled.
Stem nut:The conection piece of stem and disc,ensure disc easy operating.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | H1 | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 182(7.17) | 126(4.96) | 190.5(7.5) | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 25 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 250(9.84) | 130(5.12) | 203(8) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 31 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 250(9.84) | 157(6.18) | 228.6(9) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 48 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 302(11.89) | 225(8.86) | 266.7(10.5) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 72 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 345(13.58) | 285(11.22) | 292(11.5) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 132 |
| 250(10″) | 362(14.252) | 406.4(16) | 408(16.06) | 324(12.760) | 330.2(13) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 210 |
| 300(12″) | 431.8(17) | 482.6(19) | 483(19.02) | 383(15.08) | 355.6(14) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 315 |
Product detail pictures:
Related Product Guide:
Good quality Stainless Steel Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Factory Supply China Butterfly Valve - DL Seri...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
Best quality Automatic Butterfly Valve - UD Se...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Hot New Products Ductile Iron Gate Valve - EZ ...
Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...
-
Wholesale Dealers of Butterfly Valve Wafer Type...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
-
Discount Price China Manufacturing Cast Iron Pn...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
2021 Good Quality Butterfly Valve Sea Water Des...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weld...
