High Quality for China Swing Check Valve - AH Series Dual plate wafer check valve – TWS Valve
High Quality for China Swing Check Valve - AH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
Material list:
| No. | Part | Material | ||
| AH EH | BH | MH | ||
| 1 | Body | CI DI WCB CF8 CF8M C95400 | CI DI WCB CF8 CF8M C95400 | WCB CF8 CF8M C95400 |
| 2 | Seat | NBR EPDM VITON etc. | DI Covered Rubber | NBR EPDM VITON etc. |
| 3 | Disc | DI C95400 CF8 CF8M | DI C95400 CF8 CF8M | WCB CF8 CF8M C95400 |
| 4 | Stem | 416/304/316 | 304/316 | WCB CF8 CF8M C95400 |
| 5 | Spring | 316 | …… | |
Feature:
Fasten Screw:
Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking.
Body:
Short face to face and good rigidity.
Rubber Seat:
Vulcanized on body,tight fit and tight seat with no leakage.
Springs:
Dual springs distribute the load force evenly across each plate,ensuring quick shut off in back flow.
Disc:
Adopting unitized design of dual dics and two torsion springs,the disc closes quikly and removes water-hammer.
Gasket:
It adjusts fit-up gap and assures disc seal performance.
Dimensions:
| Size | D | D1 | D2 | L | R | t | Weight(kg) | |
| (mm) | (inch) | |||||||
| 50 | 2″ | 105(4.134) | 65(2.559) | 32.18(1.26) | 54(2.12) | 29.73(1.17) | 25(0.984) | 2.8 |
| 65 | 2.5″ | 124(4.882) | 78(3) | 42.31(1.666) | 60(2.38) | 36.14(1.423) | 29.3(1.154) | 3 |
| 80 | 3″ | 137(5.39) | 94(3.7) | 66.87(2.633) | 67(2.62) | 43.42(1.709) | 27.7(1.091) | 3.8 |
| 100 | 4″ | 175(6.89) | 117(4.6) | 97.68(3.846) | 67(2.62) | 55.66(2.191) | 26.7(1.051) | 5.5 |
| 125 | 5″ | 187(7.362) | 145(5.709) | 111.19(4.378) | 83(3.25) | 67.68(2.665) | 38.6(1.52) | 7.4 |
| 150 | 6″ | 222(8.74) | 171(6.732) | 127.13(5) | 95(3.75) | 78.64(3.096) | 46.3(1.8) | 10.9 |
| 200 | 8″ | 279(10.984) | 222(8.74) | 161.8(6.370) | 127(5) | 102.5(4.035) | 66(2.59) | 22.5 |
| 250 | 10″ | 340(13.386) | 276(10.866) | 213.8(8.49) | 140(5.5) | 126(4.961) | 70.7(2.783) | 36 |
| 300 | 12″ | 410(16.142) | 327(12.874) | 237.9(9.366) | 181(7.12) | 154(6.063) | 102(4.016) | 54 |
| 350 | 14″ | 451(17.756) | 375(14.764) | 312.5(12.303) | 184(7.25) | 179.9(7.083) | 89.2(3.512) | 80 |
| 400 | 16″ | 514(20.236) | 416(16.378) | 351(13.819) | 191(7.5) | 198.4(7.811) | 92.5(3.642) | 116 |
| 450 | 18″ | 549(21.614) | 467(18.386) | 409.4(16.118) | 203(8) | 226.2(8.906) | 96.2(3.787) | 138 |
| 500 | 20″ | 606(23.858) | 514(20.236) | 451.9(17.791) | 213(8.374) | 248.2(9.72) | 102.7(4.043) | 175 |
| 600 | 24″ | 718(28.268) | 616(24.252) | 554.7(21.839) | 222(8.75) | 297.4(11.709) | 107.3(4.224) | 239 |
| 750 | 30″ | 884(34.8) | 772(30.39) | 685.2(26.976) | 305(12) | 374(14.724) | 150(5.905) | 659 |
Product detail pictures:
Related Product Guide:
High Quality for China Swing Check Valve - AH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Chinese Professional Cast Iron Y-Strainer - TW...
Description: TWS Flanged Y Magnet Strainer with Magnetic rod for magnetic metal particles segregation. Quantity of magnet set: DN50~DN100 with one magnet set; DN125~DN200 with two magnet sets; DN250~DN300 with three magnet sets; Dimensions: Size D d K L b f n-d H DN50 165 99 125 230 19 2.5 4-18 135 DN65 185 118 145 290 19 2.5 4-18 160 DN80 200 132 160 310 19 2.5 8-18 180 DN100 220 156 180 350 19 2.5 8-18 210 DN150 285 211 240 480 19 2.5 8-22 300 DN200 340 266 295 600 20 ...
-
Manufactur standard Two Piece Body Butterfly Va...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
New Fashion Design for Pneumatic Di Butterfly V...
Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...
-
PriceList for Wafer Type Butterfly Valve - MD ...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
-
High Quality Y-Strainer - TWS Flanged Y strain...
Description: TWS Flanged Y Strainer is device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment. Introductioin: Flanged strainers are main parts of all kinds of pumps, valves in the pipeline. It is suitable for pipeline of norminal pressure<1.6MPa. Mainly used to filter dirt, rust and other ...
-
100% Original Manual Wafer Butterfly Valve - U...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
