Manufactur standard Vertical Check Valve - AH Series Dual plate wafer check valve – TWS Valve

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Manufactur standard Vertical Check Valve - AH Series Dual plate wafer check valve – TWS Valve Detail:

Description:

Material list:

No. Part Material
AH      EH BH MH
1 Body CI DI WCB CF8 CF8M C95400 CI DI WCB CF8 CF8M C95400 WCB CF8 CF8M C95400
2 Seat NBR EPDM VITON etc. DI Covered Rubber NBR EPDM VITON etc.
3 Disc DI C95400 CF8 CF8M DI C95400 CF8 CF8M WCB CF8 CF8M C95400
4 Stem 416/304/316 304/316 WCB CF8 CF8M C95400
5 Spring 316 ……

Feature:

Fasten Screw:
Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking.
Body:
Short face to face and good rigidity.
Rubber Seat:
Vulcanized on body,tight fit and tight seat with no leakage.
Springs:
Dual springs distribute the load force evenly across each plate,ensuring quick shut off in back flow.
Disc:
Adopting unitized design of dual dics and two torsion springs,the disc closes quikly and removes water-hammer.
Gasket:
It adjusts fit-up gap and assures disc seal performance.

Dimensions:

"

Size D D1 D2 L R t Weight(kg)
(mm) (inch)
50 2″ 105(4.134) 65(2.559) 32.18(1.26) 54(2.12) 29.73(1.17) 25(0.984) 2.8
65 2.5″ 124(4.882) 78(3) 42.31(1.666) 60(2.38) 36.14(1.423) 29.3(1.154) 3
80 3″ 137(5.39) 94(3.7) 66.87(2.633) 67(2.62) 43.42(1.709) 27.7(1.091) 3.8
100 4″ 175(6.89) 117(4.6) 97.68(3.846) 67(2.62) 55.66(2.191) 26.7(1.051) 5.5
125 5″ 187(7.362) 145(5.709) 111.19(4.378) 83(3.25) 67.68(2.665) 38.6(1.52) 7.4
150 6″ 222(8.74) 171(6.732) 127.13(5) 95(3.75) 78.64(3.096) 46.3(1.8) 10.9
200 8″ 279(10.984) 222(8.74) 161.8(6.370) 127(5) 102.5(4.035) 66(2.59) 22.5
250 10″ 340(13.386) 276(10.866) 213.8(8.49) 140(5.5) 126(4.961) 70.7(2.783) 36
300 12″ 410(16.142) 327(12.874) 237.9(9.366) 181(7.12) 154(6.063) 102(4.016) 54
350 14″ 451(17.756) 375(14.764) 312.5(12.303) 184(7.25) 179.9(7.083) 89.2(3.512) 80
400 16″ 514(20.236) 416(16.378) 351(13.819) 191(7.5) 198.4(7.811) 92.5(3.642) 116
450 18″ 549(21.614) 467(18.386) 409.4(16.118) 203(8) 226.2(8.906) 96.2(3.787) 138
500 20″ 606(23.858) 514(20.236) 451.9(17.791) 213(8.374) 248.2(9.72) 102.7(4.043) 175
600 24″ 718(28.268) 616(24.252) 554.7(21.839) 222(8.75) 297.4(11.709) 107.3(4.224) 239
750 30″ 884(34.8) 772(30.39) 685.2(26.976) 305(12) 374(14.724) 150(5.905) 659

Product detail pictures:

Manufactur standard Vertical Check Valve - AH Series Dual plate wafer check valve – TWS Valve detail pictures


Related Product Guide:

Manufactur standard Vertical Check Valve - AH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us

    Related products

    • China Factory for Electric Butterfly Valves - DC Series flanged eccentric butterfly valve – TWS Valve

      China Factory for Electric Butterfly Valves - ...

      Description: DC Series flanged eccentric butterfly valve incorporates a positive retained resilient disc seal and either an integral body seat. The valve has three unique attributes: less weight, more strength and lower torque. Characteristic: 1. Eccentric action reduces torque and seat contact during operation extending valve life 2. Suitable for on/off and modulating service. 3. Subject to size and damage, the seat can be repaired in the field and in certain cases, repaired from outside the...

    • China Supplier Flange Type Valve - ED Series Wafer butterfly valve – TWS Valve

      China Supplier Flange Type Valve - ED Series W...

      Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts:  Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...

    • Manufacturer for Dutile Iron Y Type Strainer - TWS Flanged Y Strainer According to ANSI B16.10 – TWS Valve

      Manufacturer for Dutile Iron Y Type Strainer -...

      Description: Y strainers mechanically remove solids from flowing steam, gases or liquid piping systems with the use of a perforated or wire mesh straining screen, and are used to protect equipment. From a simple low pressure cast iron threaded strainer to a large, high pressure special alloy unit with a custom cap design. Material list:  Parts Material Body Cast iron Bonnet Cast iron Filtering net Stainless steel Feature: Unlike other types of strainers, a Y-Strainer has the advan...

    • OEM Supply Belven Butterfly Valve - GD Series grooved end butterfly valve – TWS Valve

      OEM Supply Belven Butterfly Valve - GD Series ...

      Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...

    • Chinese wholesale Di/Ci/Ss/Wcb/Al-Bronze Wafer Butterfly Valve - BD Series Wafer butterfly valve – TWS Valve

      Chinese wholesale Di/Ci/Ss/Wcb/Al-Bronze Wafer ...

      Description: BD Series wafer butterfly valve can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different  materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed.2. Simple, compact structure, quick 90 ...

    • 2021 Latest Design Lug Support Butterfly Valve - MD Series Lug butterfly valve – TWS Valve

      2021 Latest Design Lug Support Butterfly Valve ...

      Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...