New Arrival China Light Weight Check Valve - AH Series Dual plate wafer check valve – TWS Valve
New Arrival China Light Weight Check Valve - AH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
Material list:
| No. | Part | Material | ||
| AH EH | BH | MH | ||
| 1 | Body | CI DI WCB CF8 CF8M C95400 | CI DI WCB CF8 CF8M C95400 | WCB CF8 CF8M C95400 |
| 2 | Seat | NBR EPDM VITON etc. | DI Covered Rubber | NBR EPDM VITON etc. |
| 3 | Disc | DI C95400 CF8 CF8M | DI C95400 CF8 CF8M | WCB CF8 CF8M C95400 |
| 4 | Stem | 416/304/316 | 304/316 | WCB CF8 CF8M C95400 |
| 5 | Spring | 316 | …… | |
Feature:
Fasten Screw:
Effectively prenvent the shaft from traveling,prevent valve work from failing and end from leaking.
Body:
Short face to face and good rigidity.
Rubber Seat:
Vulcanized on body,tight fit and tight seat with no leakage.
Springs:
Dual springs distribute the load force evenly across each plate,ensuring quick shut off in back flow.
Disc:
Adopting unitized design of dual dics and two torsion springs,the disc closes quikly and removes water-hammer.
Gasket:
It adjusts fit-up gap and assures disc seal performance.
Dimensions:
| Size | D | D1 | D2 | L | R | t | Weight(kg) | |
| (mm) | (inch) | |||||||
| 50 | 2″ | 105(4.134) | 65(2.559) | 32.18(1.26) | 54(2.12) | 29.73(1.17) | 25(0.984) | 2.8 |
| 65 | 2.5″ | 124(4.882) | 78(3) | 42.31(1.666) | 60(2.38) | 36.14(1.423) | 29.3(1.154) | 3 |
| 80 | 3″ | 137(5.39) | 94(3.7) | 66.87(2.633) | 67(2.62) | 43.42(1.709) | 27.7(1.091) | 3.8 |
| 100 | 4″ | 175(6.89) | 117(4.6) | 97.68(3.846) | 67(2.62) | 55.66(2.191) | 26.7(1.051) | 5.5 |
| 125 | 5″ | 187(7.362) | 145(5.709) | 111.19(4.378) | 83(3.25) | 67.68(2.665) | 38.6(1.52) | 7.4 |
| 150 | 6″ | 222(8.74) | 171(6.732) | 127.13(5) | 95(3.75) | 78.64(3.096) | 46.3(1.8) | 10.9 |
| 200 | 8″ | 279(10.984) | 222(8.74) | 161.8(6.370) | 127(5) | 102.5(4.035) | 66(2.59) | 22.5 |
| 250 | 10″ | 340(13.386) | 276(10.866) | 213.8(8.49) | 140(5.5) | 126(4.961) | 70.7(2.783) | 36 |
| 300 | 12″ | 410(16.142) | 327(12.874) | 237.9(9.366) | 181(7.12) | 154(6.063) | 102(4.016) | 54 |
| 350 | 14″ | 451(17.756) | 375(14.764) | 312.5(12.303) | 184(7.25) | 179.9(7.083) | 89.2(3.512) | 80 |
| 400 | 16″ | 514(20.236) | 416(16.378) | 351(13.819) | 191(7.5) | 198.4(7.811) | 92.5(3.642) | 116 |
| 450 | 18″ | 549(21.614) | 467(18.386) | 409.4(16.118) | 203(8) | 226.2(8.906) | 96.2(3.787) | 138 |
| 500 | 20″ | 606(23.858) | 514(20.236) | 451.9(17.791) | 213(8.374) | 248.2(9.72) | 102.7(4.043) | 175 |
| 600 | 24″ | 718(28.268) | 616(24.252) | 554.7(21.839) | 222(8.75) | 297.4(11.709) | 107.3(4.224) | 239 |
| 750 | 30″ | 884(34.8) | 772(30.39) | 685.2(26.976) | 305(12) | 374(14.724) | 150(5.905) | 659 |
Product detail pictures:
Related Product Guide:
New Arrival China Light Weight Check Valve - AH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
High Quality for Pneumatic Operated Butterfly V...
Description: BD Series wafer butterfly valve can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed.2. Simple, compact structure, quick 90 ...
-
Competitive Price for Lever Handle Butterfly Va...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
Manufacturer for Cast Iron Gate Valve - EZ Ser...
Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...
-
Professional China Ss316 Check Valve - EH Seri...
Description: EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines. Characteristic: -Small in size, light in weight, compact in sturcture, easy in maintenance. -Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automat...
-
China wholesale Y Magnet Strainer - TWS Flange...
Description: TWS Flanged Y Strainer is device for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment. Introductioin: Flanged strainers are main parts of all kinds of pumps, valves in the pipeline. It is suitable for pipeline of norminal pressure<1.6MPa. Mainly used to filter dirt, rust and other ...
-
Low price for Lug Type Flange Butterfly Valve -...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
