Since 2026, multiple large-scale thermal power and hydropower projects have intensively entered the construction or EPC calibration stage, releasing a large amount of procurement demand for the valve industry. The total investment scale of the five key energy projects released in this issue exceeds 10 billion yuan, covering hydropower stations, ultra-supercritical combined heat and power, million-kilowatt coal power expansion, large coal-fired units and other fields.
1. Tibet opens Quzika Hydropower Station
On July 30, 2026, a groundbreaking ceremony for the Xizang Kaitou Quzika Hydropower Station project was held on the banks of the Lancang River, officially entering the full-scale construction phase. The project has a total investment of 5.895 billion yuan and an installed capacity of 405,000 kW. It is being built by Xizang Kaitou Quzika Hydropower Co., Ltd., with a total construction period of 54 months. The station’s average annual power generation can reach 1.869 billion kWh. The reservoir headworks consist of water-retaining, flood-discharge, and water-conveyance and power-generation structures; the dam has a maximum height of 79.5 meters and a total length of 411 meters, and features daily regulation capability.
As an important component of the clean energy base in the upper Lancang River (Xizang section), once completed and put into operation, the Quzika Hydropower Station will save approximately 560,000 tonnes of standard coal and reduce carbon dioxide emissions by about 1.46 million tonnes each year. It will provide strong support for filling the regional power grid’s electricity shortfall and underpin the national ‘West-to-East Power Transmission’ strategy.
Valve Purchasing Opportunities
The demand for valves in hydropower projects is mainly concentrated in the fields of water inlets, turbine overflow systems, flood discharge systems, technical water supply systems, drainage systems and fire protection systems. The main valve types include: water inlet ball valve/butterfly valve (large diameter, high pressure), maintenance gate valve, wafer butterfly valve, check valve, safety valve, pressure reducing valve, exhaust valve, regulating valve for technical water supply, etc. The project has just entered the comprehensive construction stage. During the 54-month construction period, the procurement of various valves will be released in batches according to the construction progress.
2. Datang Xiahuayuan 2×660 MW Combined Heat and Power (CHP) Project
The 2×660 MW CHP expansion project of the Xiahuayuan Thermal Power Branch of Datang International Power Generation Co., Ltd. is located at No. 1 Minsheng Road, Xiahuayuan District, Zhangjiakou City, Hebei Province, and is being implemented as a renovation and expansion project on the existing, well-established plant site. The project plans to construct two new 660 MW ultra-supercritical CHP units; once completed and in operation, the total heating coverage area will reach 28 million square meters.
Upon completion, the project will greatly enhance the power supply security of northern Hebei, effectively replace scattered small coal-fired heat sources in the region, facilitate the consumption of wind and solar renewable energy, and promote the green and low-carbon transformation of the thermal power industry in North China. At present, the successful bidders for the project’s ‘five connections and one leveling’ general construction contract have been announced, and the candidate contractors for preliminary site preparation works have been finalized, marking tangible progress in pre-project preparations and laying a solid foundation for the commencement of the main works.
Valve Purchasing Opportunities
As site infrastructure work progresses, the project will successively launch public tenders for lots covering main unit construction and installation, procurement of main and auxiliary equipment, and construction of environmental protection facilities. CHP units have a large and wide-ranging demand for valves, mainly including: main steam gate valves, hot/cold reheat butterfly valves, feedwater control valves, safety valves, extraction check valves, circulating water butterfly valves, and various globe valves for the condensate system.
3. National Energy Chongqing Wanzhou Power Plant Phase II Expansion
The second phase expansion project of National Energy Chongqing Wanzhou Power Plant is located in Xintian Town, Wanzhou District, Chongqing City. It plans to expand two 1000MW ultra-supercritical wet-cooled coal-fired units. The project was approved by the Chongqing Municipal Development and Reform Commission with a total investment of 6.655 billion yuan. The first phase of Wanzhou Power Plant has built 2×1050MW ultra-supercritical units. After the second phase expansion is completed and put into operation, it will further enhance the power supply capacity in eastern Sichuan and Chongqing and support the energy supply in Chengdu and Chongqing regions.
The construction bidding sections of the entire plant are divided into four bidding sections A, B, C, and D. Among them, bidding section D is the EPC bidding section for desulfurization, zero discharge of desulfurization wastewater, and denitrification. At present, the announcement of the winning candidates for the flue gas wet desulfurization (including zero discharge of desulfurization wastewater) and denitrification EPC projects in section D has been officially released, marking a key node in the project’s environmental supporting construction.
Valve Purchasing Opportunities
The second phase of Wanzhou Power Plant will subsequently launch a bidding process for the procurement of auxiliary machinery, electrical equipment, valves and other equipment. Judging from the project type, one million kilowatt ultra-supercritical units have extremely high requirements on the technical level and reliability of valves. Core requirements include: main steam/reheat system high temperature and high pressure gate valves and stop valves, feed water pump outlet gate valves, minimum flow regulating valves, boiler soot blowing system traps and exhaust valves, desulfurization system corrosion-resistant butterfly valves, slurry regulating valves, denitrification system ammonia pipeline stop valves and ball valves, desulfurization wastewater zero discharge system special valves, etc.
4. Quanhui Petrochemical Industrial Zone Cogeneration Phase II
The Quanhui Petrochemical Industrial Zone Cogeneration Phase II project is located in Quanhui Petrochemical Industrial Zone, Hui’an County, Quanzhou City, Fujian Province. It is invested and constructed by Fujian Dongqiao Thermal Power Co., Ltd. The project plans to build two new 650MW ultra-supercritical primary reheat extraction and condensation heating units. Relying on the reserved site expansion in the first phase of the plant, a full set of environmental protection facilities such as desulfurization, denitrification, dust removal, and zero wastewater discharge will be simultaneously constructed.
The first phase of the 2×660MW unit has been successfully started and is expected to be officially put into operation in May 2027. The second phase of the project is planned to start in December 2026. Unit #3 will complete a 168-hour trial operation and be handed over to production in December 2028. Unit #4 will be put into operation in February 2029. This bidding is for the complete EPC general contracting section. The first winning candidate is Shandong Electric Power Engineering Consulting Institute Co., Ltd., with a total bidding price of 3,599.85 million yuan.
Valve Purchasing Opportunities
Since this project adopts a complete EPC general contracting model, valve procurement will be organized and implemented by the general contractor. The main requirements cover: high-temperature and high-pressure valves in the main steam system, check valves and regulating valves in the heating and extraction systems, large-diameter butterfly valves in the circulating water system, various stop valves and regulating valves in the condensate and water supply systems, corrosion-resistant valves in the chemical water system, special valves for desulfurization and denitrification systems, etc. The project is located in a coastal petrochemical park and has high equipment anti-corrosion and salt spray requirements.
5. Guizhou Xingren Power Plant 2×660 MW Coal-Fired Generating Units
Guizhou Xingren Power Plant plans to build two 660MW high-efficiency ultra-supercritical primary reheat coal-fired steam turbine generator units, which will be equipped with full-process flue gas desulfurization, denitrification, wet electrostatic precipitator, zero wastewater discharge, and comprehensive ash and slag utilization environmental protection facilities. The factory covers a total area of 626,300 square meters. The main buildings include the main factory building, boiler area, turbine room, coal bunker room, coal conveying system, cooling tower, water treatment workshop, sewage treatment station, booster station, ash storage yard and comprehensive office and living area.
The unit adopts ultra-low coal consumption and ultra-supercritical technology. The coal consumption for power supply is far lower than the national thermal power admission benchmark, and the carbon emission and major pollutant emission indicators are better than the national ultra-low emission limit. At present, the project has released a design general contract bidding notice, the three major hosts have carried out technical exchanges and pre-registration for framework bidding, and the bidding list for auxiliary equipment is being compiled.
Valve Purchasing Opportunities
As a new large-scale thermal power project in southwest China, Xingren Power Plant purchases a full range of valves in considerable quantities. Estimated demand includes: boiler steam and water system gate valves, stop valves, safety valves, turbine main steam/reheat system high temperature and high pressure valves, auxiliary engine cooling water system butterfly valves, ductile iron check valves, chemical water treatment system corrosion-resistant valves, desulfurization and denitrification system special valves, ash and slag treatment system wear-resistant valves, etc. The project has not yet officially opened bids. It is now a critical window period for valve companies to establish technical contacts with design institutes and general contractors and strive to enter the short list.
Post time: Nov-18-2026

