OEM Factory for Big Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve
OEM Factory for Big Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Rising stem (Outside Screw and Yoke)type, and suitable for use with water and neutral liquids (sewage) . The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is open, while the stem is no longer visible when the valve is closed. In general this is a requirement in these kinds of systems to ensure a fast visual control of the system status..
Features:
Body:No groove design,prevent from impurities,ensure effective sealing.With epoxy coating inside,conform to potable water requirement.
Disc:Metal frame with rubber lined,ensure valve sealing and conform to potable water requirement.
Stem:Made of high strength materials,ensure gate valve easily controlled.
Stem nut:The conection piece of stem and disc,ensure disc easy operating.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | H1 | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 182(7.17) | 126(4.96) | 190.5(7.5) | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 25 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 250(9.84) | 130(5.12) | 203(8) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 31 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 250(9.84) | 157(6.18) | 228.6(9) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 48 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 302(11.89) | 225(8.86) | 266.7(10.5) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 72 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 345(13.58) | 285(11.22) | 292(11.5) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 132 |
| 250(10″) | 362(14.252) | 406.4(16) | 408(16.06) | 324(12.760) | 330.2(13) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 210 |
| 300(12″) | 431.8(17) | 482.6(19) | 483(19.02) | 383(15.08) | 355.6(14) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 315 |
Product detail pictures:
Related Product Guide:
OEM Factory for Big Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
Factory wholesale Dn300 Butterfly Valve - MD S...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
New Fashion Design for Butterfly Swing Wafer No...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E ...
-
High Quality for Pneumatic Operated Butterfly V...
Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...
-
Wholesale Dealers of Butterfly Valve Wafer Type...
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation...
-
Manufacturing Companies for Wafer Resilient Sea...
Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...
-
Factory wholesale Rubber Gate Valve - AZ Serie...
Description: AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight se...
