OEM manufacturer Ks Standard Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve
OEM manufacturer Ks Standard Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve Detail:
Description:
AZ Series Resilient seated NRS gate valve is a wedge gate valve and Rising stem (Outside Screw and Yoke)type, and suitable for use with water and neutral liquids (sewage) . The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is open, while the stem is no longer visible when the valve is closed. In general this is a requirement in these kinds of systems to ensure a fast visual control of the system status..
Features:
Body:No groove design,prevent from impurities,ensure effective sealing.With epoxy coating inside,conform to potable water requirement.
Disc:Metal frame with rubber lined,ensure valve sealing and conform to potable water requirement.
Stem:Made of high strength materials,ensure gate valve easily controlled.
Stem nut:The conection piece of stem and disc,ensure disc easy operating.
Dimensions:
| Size mm (inch) | D1 | D2 | D0 | H | H1 | L | b | N-Φd | Weight (kg) |
| 65(2.5″) | 139.7(5.5) | 178(7) | 182(7.17) | 126(4.96) | 190.5(7.5) | 190.5(7.5) | 17.53(0.69) | 4-19(0.75) | 25 |
| 80(3″) | 152.4(6_) | 190.5(7.5) | 250(9.84) | 130(5.12) | 203(8) | 203.2(8) | 19.05(0.75) | 4-19(0.75) | 31 |
| 100(4″) | 190.5(7.5) | 228.6(9) | 250(9.84) | 157(6.18) | 228.6(9) | 228.6(9) | 23.88(0.94) | 8-19(0.75) | 48 |
| 150(6″) | 241.3(9.5) | 279.4(11) | 302(11.89) | 225(8.86) | 266.7(10.5) | 266.7(10.5) | 25.4(1) | 8-22(0.88) | 72 |
| 200(8″) | 298.5(11.75) | 342.9(13.5) | 345(13.58) | 285(11.22) | 292(11.5) | 292.1(11.5) | 28.45(1.12) | 8-22(0.88) | 132 |
| 250(10″) | 362(14.252) | 406.4(16) | 408(16.06) | 324(12.760) | 330.2(13) | 330.2(13) | 30.23(1.19) | 12-25.4(1) | 210 |
| 300(12″) | 431.8(17) | 482.6(19) | 483(19.02) | 383(15.08) | 355.6(14) | 355.6(14) | 31.75(1.25) | 12-25.4(1) | 315 |
Product detail pictures:
Related Product Guide:
OEM manufacturer Ks Standard Gate Valve - AZ Series Resilient seated OS&Y gate valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
OEM/ODM Supplier Vag Butterfly Valve - UD Seri...
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards should conform to butterfly valve standards; suggest using weldi...
-
2021 High quality Y Type Strainer - TWS Flange...
Description: TWS Flanged Y Magnet Strainer with Magnetic rod for magnetic metal particles segregation. Quantity of magnet set: DN50~DN100 with one magnet set; DN125~DN200 with two magnet sets; DN250~DN300 with three magnet sets; Dimensions: Size D d K L b f n-d H DN50 165 99 125 230 19 2.5 4-18 135 DN65 185 118 145 290 19 2.5 4-18 160 DN80 200 132 160 310 19 2.5 8-18 180 DN100 220 156 180 350 19 2.5 8-18 210 DN150 285 211 240 480 19 2.5 8-22 300 DN200 340 266 295 600 20 ...
-
Quality Inspection for Hard Seal Butterfly Valv...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimen...
-
Manufactur standard Lugged Butterfly Valve - M...
Description: Comparing to our YD series,flange connection of MD Series wafer butterfly valve is specific,the handle is malleable iron. Working Temperature: •-45℃ to +135℃ for EPDM liner • -12℃ to +82℃ for NBR liner • +10℃ to +150℃ for PTFE liner Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Dimens...
-
Quality Inspection for Viton Butterfly Valve -...
Description: ED Series Wafer butterfly valve is soft sleeve type and can separate the body and fluid medium exactly,. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Seat Specification: Material Temperature Use Description NBR -23℃ ~ 82℃ Buna-NBR:(Nitrile Butadiene Rubber ) has good tensile st...
-
Manufacturing Companies for Wafer Resilient Sea...
Description: YD Series Wafer butterfly valve ‘s flange connection is universal standard,and the material of handle is aluminium;It can be used as a device to cut-off or regulate the flow in various medium pipes. Through selecting different materials of disc and seal seat, as well as the pinless connection between disc and stem,the valve can be applied to worse conditions, such as desulphurization vacuum, sea water desalinization. Characteristic: 1. Small in size&light in weight and ...
