OEM/ODM Factory Cast Steel Flange Check Valve - EH Series Dual plate wafer check valve – TWS Valve
OEM/ODM Factory Cast Steel Flange Check Valve - EH Series Dual plate wafer check valve – TWS Valve Detail:
Description:
EH Series Dual plate wafer check valve is with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, that can prevent the medium from flowing back.The check valve can be installed on both horizontal and vertical direction pipelines.
Characteristic:
-Small in size, light in weight, compact in sturcture, easy in maintenance.
-Two torsion springs are added to each of the pair valve plates, which close the plates quickly and automatically.
-The Quick cloth action preventsthe medium from flowing back.
-Short face to face and good rigidity.
-Easy installation, it can be installed on both horizontal and vertival direction pipelines.
-This valve is tighly sealed, without leakage under the water pressure test.
-Safe and reliable in operation, High interference-resistance.
Applications:
General industrial use.
Dimensions:
| Size | D | D1 | D2 | L | R | t | Weight(kg) | |
| (mm) | (inch) | |||||||
| 40 | 1.5″ | 92 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 50 | 2″ | 107 | 65 | 43.3 | 43 | 28.8 | 19 | 1.5 |
| 65 | 2.5″ | 127 | 80 | 60.2 | 46 | 36.1 | 20 | 2.4 |
| 80 | 3″ | 142 | 94 | 66.4 | 64 | 43.4 | 28 | 3.6 |
| 100 | 4″ | 162 | 117 | 90.8 | 64 | 52.8 | 27 | 5.7 |
| 125 | 5″ | 192 | 145 | 116.9 | 70 | 65.7 | 30 | 7.3 |
| 150 | 6″ | 218 | 170 | 144.6 | 76 | 78.6 | 31 | 9 |
| 200 | 8″ | 273 | 224 | 198.2 | 89 | 104.4 | 33 | 17 |
| 250 | 10″ | 328 | 265 | 233.7 | 114 | 127 | 50 | 26 |
| 300 | 12″ | 378 | 310 | 283.9 | 114 | 148.3 | 43 | 42 |
| 350 | 14″ | 438 | 360 | 332.9 | 127 | 172.4 | 45 | 55 |
| 400 | 16″ | 489 | 410 | 381 | 140 | 197.4 | 52 | 75 |
| 450 | 18″ | 539 | 450 | 419.9 | 152 | 217.8 | 58 | 101 |
| 500 | 20″ | 594 | 505 | 467.8 | 152 | 241 | 58 | 111 |
| 600 | 24″ | 690 | 624 | 572.6 | 178 | 295.4 | 73 | 172 |
| 700 | 28″ | 800 | 720 | 680 | 229 | 354 | 98 | 219 |
Product detail pictures:
Related Product Guide:
OEM/ODM Factory Cast Steel Flange Check Valve - EH Series Dual plate wafer check valve – TWS Valve , The product will supply to all over the world, such as: , , ,
By from -
By from -
Related products
-
OEM Factory for Big Gate Valve - EZ Series Re...
Description: EZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage). Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight seal and rust prevention. -Integrated brass nut: By means of special casting process. the brass stem nut is integrated ...
-
Original Factory Butterfly Valve Factory - GD ...
Description: GD Series grooved end butterfly valve is a grooved end bubble tight shutoff butterfly valve with outstanding flow characteristics. The rubber seal is molded onto the ductile iron disc, in order to allow for maximum flow potential. It offers economical, efficient, and reliable service for grooved end piping applications. It is easily installed with two grooved end couplings. Typical application: HVAC, filtering system, etc. Dimensions: Size A B D D1 D2 L H E...
-
Super Purchasing for Water Filter - DL Series ...
Description: DL Series flanged concentric butterfly valve is with centric disc and bonded liner,and have all same common features of other wafer/lug series,these valves are featured by a higher strength of the body and better resistance to pipe pressures as safey factor. Having all same common features of the univisal series, these valves are featured by a higher strength of the body and better resistance to pipe pressures as safety factor. Characteristic: 1. Short Length pattern design 2. V...
-
Low MOQ for Hand Lever Butterfly Valve - MD Se...
Description: MD Series Lug type butterfly valve allows downstream pipelines and equipments online repair, and it can be installed on pipe ends as exhaust valve. Alignment features of lugged body allows easy installation between pipeline flanges. a real installationi cost saving, can be installed in the pipe end. Characteristic: 1. Small in size&light in weight and easy maintenance. It can be mounted wherever needed. 2. Simple, compact structure, quick 90 degree on-off operation 3. Disc ha...
-
OEM/ODM Manufacturer Non Rising Stem Metal Seat...
Description: AZ Series Resilient seated NRS gate valve is a wedge gate valve and Non-rising stem type, and suitable for use with water and neutral liquids (sewage) . The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Characteristic: -On-line replacement of top seal: Easy installation and maintenance. -Integral rubber-clad disc: The ductile iron frame work is thermal-clad integrally with high performance rubber. Ensuring tight se...
-
Hot-selling Flanged Gate Valve - WZ Series Met...
Description: WZ Series Metal seated OS&Y gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The OS&Y (Outside Screw and Yoke) gate valve is mainly used in fire protection sprinkler systems. The main difference from a standard NRS (Non Rising Stem) gate valve is that the stem and stem nut are placed outside the valve body. This makes it easy to see if the valve is open or closed, as almost the entire length of the stem is visible when the valve is ...
