Casting ductile iron IP 67 Worm Gear with handwheel DN40-1600
Description:
TWS produces series manual high efficiency worm gear actuator, is based on the 3D CAD framework of modular design, the rated speed ratio can meet the input torque of all different standards, such as AWWA C504 API 6D, API 600 and others.
Our worm gear actuators, have been widely applied for the butterfly valve, ball valve,plug valve and other valves, for opening and closing function. BS and BDS speed reduction units are used in the pipeline network applications. The connection with the valves can meet ISO 5211 standard and customized.
Characteristics:
Use famous brand bearings to improve efficiency and service life. Worm and input shaft are fixed with 4 bolts for higher safety.
Worm Gear is sealed with O-ring, and the shaft hole is sealed with rubber sealing plate to provide all-round water-proof and dust-proof protection.
The high efficiency secondary reduction unit adopts high strength carbon steel and heat treatment technique. More reasonable speed ratio provides a lighter operation experience.
The worm is made of ductile iron QT500-7 with the worm shaft （carbon steel material or 304 after quenching）， combined with high-precision processing, has the characteristics of wear resistance and high transmission efficiency.
The die-casting aluminum valve position indicator plate is used to indicate the opening position of the valve intuitively.
The body of worm gear is made of high-strength ductile iron, and its surface is protected by epoxy spraying. The valve connecting flange conforms to IS05211 standard, which makes the sizing more simple.
Parts and Material:
|
ITEM |
PART NAME |
MATERIAL DESCRIPTION(Standard) |
|||
|
Material Name |
GB |
JIS |
ASTM |
||
|
1 |
Body |
Ductile Iron |
QT450-10 |
FCD-450 |
65-45-12 |
|
2 |
Worm |
Ductile Iron |
QT500-7 |
FCD-500 |
80-55-06 |
|
3 |
Cover |
Ductile Iron |
QT450-10 |
FCD-450 |
65-45-12 |
|
4 |
Worm |
Alloy Steel |
45 |
SCM435 |
ANSI 4340 |
|
5 |
Input Shaft |
Carbon Steel |
304 |
304 |
CF8 |
|
6 |
Position Indicator |
Aluminium Alloy |
YL112 |
ADC12 |
SG100B |
|
7 |
Sealing Plate |
BUNA-N |
NBR |
NBR |
NBR |
|
8 |
Thrust Bearing |
Bearing Steel |
GCr15 |
SUJ2 |
A295-52100 |
|
9 |
Bushing |
Carbon Steel |
20+PTFE |
S20C+PTFE |
A576-1020+PTFE |
|
10 |
Oil Sealing |
BUNA-N |
NBR |
NBR |
NBR |
|
11 |
End Cover Oil Sealing |
BUNA-N |
NBR |
NBR |
NBR |
|
12 |
O-Ring |
BUNA-N |
NBR |
NBR |
NBR |
|
13 |
Hexagon Bolt |
Alloy Steel |
45 |
SCM435 |
A322-4135 |
|
14 |
Bolt |
Alloy Steel |
45 |
SCM435 |
A322-4135 |
|
15 |
Hexagon Nut |
Alloy Steel |
45 |
SCM435 |
A322-4135 |
|
16 |
Hexagon Nut |
Carbon Steel |
45 |
S45C |
A576-1045 |
|
17 |
Nut Cover |
BUNA-N |
NBR |
NBR |
NBR |
|
18 |
Locking Screw |
Alloy Steel |
45 |
SCM435 |
A322-4135 |
|
19 |
Flat Key |
Carbon Steel |
45 |
S45C |
A576-1045 |
Related products
-
TWS Flanged Y Magnet Strainer
Description: TWS Flanged Y Magnet Strainer with Magnetic rod for magnetic metal particles segregation. Quantity of magnet set: DN50~DN100 with one magnet set; DN125~DN200 with two magnet sets; DN250~DN300 with three magnet sets; Dimensions: Size D d K L b f n-d H DN50 165 99 125 230 19 2.5 4-18 135 DN65 185 118 145 290 19 2.5 4-18 160 DN80 200 132 160 310 19 2.5 8-18 180 DN100 220 156 180 350 19 2.5 8-18 210 DN150 285 211 240 480 19 2.5 8-22 300 DN200 340 266 295 600 20...
-
BH Series Dual plate wafer check valve
Description: BH Series Dual plate wafer check valve is the cost-effective backflow protection for piping systems,as it is the only fully elastomer-lined insert check valve.The valve body is completely isolated from line media which can extend the service life of this series in most appications and makes it an especially economical alternative in application which would othervise require check valve made of expensive alloys.. Characteristic: -Small in size, light in weight, compact in sturctur...
-
UD Series hard-seated butterfly valve
Description: UD Series hard seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH Characteristics: 1.Correcting holes are made on flang...
-
UD Series Soft-seated butterfly valve
UD Series soft sleeve seated butterfly valve is Wafer pattern with flanges ,the face to face is EN558-1 20 series as wafer type. Characteristics: 1.Correcting holes are made on flange according to standard, easy correcting during the installation. 2.Through-out bolt or one-side bolt used. Easy replacing and maintenance. 3.The soft sleeve seat can isolate the body from media. Product operation instruction 1. Pipe flange standards ...
-
WZ Series Metal seated NRS gate valve
Description: WZ Series Metal seated NRS gate valve use a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. Application: Water supply system, water treatment, sewage disposal, food processing, fire protection system, natural gas, liquefied gas system etc. Dimensions: Type DN(mm) L D D1 b Z-Φ...
-
Mini Backflow Preventer
Description: Most of the residents don't install the backflow preventer in their water pipe. Only a few people use the normal check valve to prevent back-low. So it will have a big potential ptall. And the old type of backflow preventer is expensive and not easy to drain. So it was very hard to be widely used in the past. But now, we develop the new type to solve it all. Our anti drip mini backlow preventer wil be widely used in ...
