Water Balance Valve - Factory, Suppliers, Manufacturers from China

Water Balance Valve, , , ,. The product will supply to all over the world, such as Europe, America, Australia,, ,, .

Common fault handling method of pneumatic valve

1 Treatment method for increasing pneumatic valve leakage If the case of the valve spool is worn to reduce the leakage of the valve, it is necessary to clean and remove the foreign body; if the pre...
Gate valve and a stopcock valve

A stopcock valve is [1] a straight-through valve that opens and closes quickly, and is also commonly used for media with suspended particles due to the wiping effect of the movement between the scr...
The difference between OS&Y gate valve and NRS gate valve

1.The stem of the OS&Y gate valve is exposed, while the stem of the NRS gate valve is in the valve body. 2.The OS&Y gate valve is driven by the thread transmission between the valve ...
What defects are prone to valve castings?

1. The stomata This is a small cavity formed by the gas that the metal solidification process does not escape inside the metal. Its inner wall is smooth and contains gas, which has a high reflectiv...
Features of D371X Manual Operated Soft Seal Butterfly Valve

Tianjin Tanggu Water-seal Valve was established in 1997, which is a professional manufacture that integrates design and development, production, installation, sales and service. The main products i...
Valve selection principles and valve selection steps

1. Valve selection principle: The selected valve should meet the following basic principles. (1) Safety and reliability of petrochemical, power station, metallurgy and other industries require cont...