Rubber Check Valve - Manufacturers, Factory, Suppliers from China

Rubber Check Valve, , , ,. The product will supply to all over the world, such as Europe, America, Australia,, ,, .

The working principle and construction and installation points of rubber seated butterfly valve

The rubber seated butterfly valve is a kind of valve that uses a circular butterfly plate as the opening and closing part and rotates with the valve stem to open, close and adjust the fluid channel...
Butterfly valve installation precautions

1. Clean the sealing surface of the butterfly valve and the dirt in the pipeline. 2. The inner port of the flange on the pipeline must be aligned and press the rubber sealing ring of the butterfly ...
Cause analysis of common valve faults

(1) The valve does not operate. The fault phenomenon and its causes are as follows: 1. No source of gas.① The air source is not open, ② due to the water content of the air source ice in winter, res...
Practical knowledge of valves

Valve foundation 1. The basic parameters of the valve are: nominal pressure PN and nominal diameter DN 2. Basic function of the valve: cut off the connected medium, adjust the flow rate, and change...
How does the air release valve work?

Air release valves are used in pipeline air of independent heating systems, central heating systems, heating boilers, central air release conditioning, floor heating and solar heating systems. &nbs...
Classification of Rubber sealing Check Valves

Rubber Sealing Check valves can be classified according to their structure and installation method as follows: Swing Check Valve: The disc of a swing check valve is disc-shaped and rotates around t...