Butterfly Valve Wafer Type - Manufacturers, Factory, Suppliers from China

Butterfly Valve Wafer Type, , , ,. The product will supply to all over the world, such as Europe, America, Australia,, ,, .

2019 PCVEXPO Exhibtion in Russia

TWS Valve will attend the 2019 PCVEXPO Exhibtion in Russia The 19th International Exhibition PCVExpo / Pumps, Compressors, Valves, Actuators and Engines Date: 27 – 29 October 2020 • Moscow, ...
How to prolong the service life of fluorine-lined butterfly valve

Fluoroplastic lined corrosion-resistant butterfly valve is to place polytetrafluoroethylene resin (or profile processed) on the inner wall of steel or iron butterfly valve pressure-bearing parts or...
Butterfly valve knowledge discussion

In the 30s, the butterfly valve was invented in United States, introduced to the Japan in the 50s, and was widely used in Japan in the 60s, and it was promoted in China after the 70s. At present, b...
How to repair the damaged valve stem?

① Use a file to remove the burr on the strained part of the valve stem; for the shallower part of the strain, use a flat shovel to process it to a depth of about 1mm, and then use an emery cloth or...
What should we do if the butterfly valve leaks? Check out these 5 aspects!

In the daily use of butterfly valves, various failures are often encountered. The leakage of the valve body and bonnet of the butterfly valve is one of the many failures. What is the reason for thi...
Cause analysis of common valve faults

(1) The valve does not operate. The fault phenomenon and its causes are as follows: 1. No source of gas.① The air source is not open, ② due to the water content of the air source ice in winter, res...